Problem: Hot-swapping… have to navigate to all these different folders. Wah! So annoying. End up neglecting certain folders of presets due to their unfortunate locations. Presets get sad and lonely, and begin to wither.
Ableton 9 has a built-in secret “Folder Architecture”. Fiddling around with how things appear in the browser i discovered that if you make a folder with the same name as one of the built-in categories (for instance: “Amp Simulation”) in your User Library Presets folders, any presets in that folder will appear in the respective folder of the same name in the “Categories” pane of the browser (instrument, drum, audio effect, or midi effect racks). Customizing this way provides more unified access to all factory and user-created content in the same location, which makes my life easier. If i want an amp coloration effect preset, for instance, i have one single folder i can open up where i see all user AND factory presets (and even vst and max for live presets) all in one nice list together, easy to hot-swap and preview amongst. How to do this? Simply save files in your user library, organized however you like, but in folders with specific names. That’s all! The text has to be verbatim. There are only certain folder names you can use, which i figured out with experimentation.
Let’s run through an example of the process. Let’s say you devise some wacky modulation audio effect rack you want to save to be able to use later in other projects. You want it to appear in “Categories -> Audio Effects -> Audio Effects Rack -> Modulation & Rhythmic” along with the factory modulation-type presets.
1) Save Preset In User Library: Save your preset wherever you want in your user library. Let’s say you’re saving it in a custom folder you made in your user library called “Cool FX By Me”.
2) Set Browser Category folder: Choose a category for your Instrument, Instrument Rack, Drum Rack, or Midi FX Rack preset according to the lists below. Make a new folder of that same name where your preset is saved, and move it into the new folder you just made. Now it will appear in the correct category section of the browser as well as in your custom spot.
In our example “Modulation & Rhythmic” would be appropriate, so we’ll make a new folder inside the “Cool FX By Me” folder called “Modulation & Rhythmic” and save our new effect rack there. Now it shows up in the “Categories” section of the browser next to its Core Pack buddies. Cool indeed!
Done! Unless you want to make things even more cleaned up, then you can also follow more advanced procedures to optimize navigation of your hierarchical content…
Optional 1) Name-Changings: Add a word to the beginning of the filename so that it appears alphabetically listed next to other devices of similar types (example: EQ; Phaser; Limiter;). Many presets already contain the word you may want. If so, i recommend moving that word to the beginning of the file name (e.g. rename “Swanky Reverb” to “Reverb Swanky”) so that similar items are alphabetically adjacent. This will feel natural to speakers of Spanish and other languages which tend to naturally place adjectives after nouns rather than before.
Example: “Norman – Optical Compressor” would be renamed “Compressor Optical Norman”in out system, so that it appears in the browser right next to other compressors, immediately adjacent to any other extant optical compressors. How handy.
Optional 2) Holder Racks: For each Plugin (VST, Audio Unit, MaxForLive, and Ableton Factory) device you own and use, group it (mac: cmd-G / win: ctrl-G) and save it as a default preset with an appropriate name and in an appropriate category folder in your user library. If you want all unique devices to appear separate from amalgamated-device-racks, add an underscore prefix to the name (Example: Save “Generic Analog Compressor VST” as an Effect Rack called “_Compressor Analog Generic” or save “TAL Bassline” as an Instrument Rack called “_Synth Bass TAL Bassline”). For devices with 8 or less parameters, map them to the macros if you want, set to full practical ranges and at starting default points. This is completely optional, though, since you can access all parameters and automation of plugins and max devices anyways. Whether or not you decide to map any of the parameters to macros, it is recommended to make one default rack for each Plugin saved in your User Library.
The Categories. Only these categories seem to work. So if you want something to appear in any category folder in the browser (other than “Other” which everything else defaults to), you have to use one of these. [Example: Say you have an exotic-sounding tension instrument preset you want to save; create a new folder inside the “Tension” folder called “Exotic” and save the preset there.] The named folder can be nested anywhere inside your user library, which is really useful, but the items will have to be directly in a folder with said name (within whatever location it resides).
Another good excuse to perform these organizations is to avoid that “Other” folder from being overwhelmingly stuffed with a clutter of variant types of stuff. Another obvious benefit is the ability to hot-swap to ALL similar items (as determined by you) in one single unified folder location.
For Instruments & Instrument Racks:
Any of these will work in all of these folders: Analog, Collision, Drum Rack, Electric, External Instrument, Impulse, Instrument Rack, Operator, Sampler, Simpler, and Tension.
Presets put in folders of these names will appear in the respective folder in the “Sounds” browser link.
Ambient & Evolving
Guitar & Plucked
Others * everything in a folder with any name other than one on this list ends up here
Piano & Keys
(No Category) * Instrument Rack presets placed in the “User Library -> Presets ->-> Instruments -> Instrument Rack” folder will appear listed after the category folders.
For Audio Effects:
Mixing & Mastering
Modulation & Rhythmic
Others * everything in a folder with any name other than one on this list ends up here
Performance & DJ
(No Category) * Audio Effect Rack presets placed in the “User Library -> Presets -> Audio Effects -> Audio Effect Rack” folder will appear listed after the category folders.
Drum Kits don’t have any categories that i have found that will appear in “Drums”, unfortunately. Drum Racks that sound melodic rather than percussive can be categorized into the instrument categories if desired. Otherwise they will just appear in “Drums” in a big list. However, we CAN categorize individual drum hits, which is extremely useful when making custom drum kits. The cool thing about Drum Hits is that both raw samples and rack presets will appear. So… you could for instance grab a snare .wav file, or grab a snare shot already set up in a simpler, either from the same list. Less switching around to different folders to build custom kits!
Drum Hits Categories:
(No Category) * Drum Rack presets placed in the “User Library -> Presets -> Instruments -> Drum Rack” folder (or any nested folder therein not named with one of the set categories) will appear listed in “Drums” after the Drum Hits folders.
For Midi FX:
Performance & DJ
(No Category) * Midi FX Rack presets placed in the “User Library -> Presets -> Midi Effect -> Midi Effect Rack” folder will appear in no category, listed after the category folders.
Won’t show up in categories. Viewing within your User Library folder, all Max devices will be shown categorized as you have it, but in the Max For Live category pane link, Max Audio Effects, Max Instruments, and Max Midi Effects will each appear in long, messy lists.
SOLUTION: Holder Racks. (see above)
<–…Max Mess (yikes!)
PerforModule Recommendations for Specific Categorization (optional reading below)
Instrument Racks: Not all of the categories are useful for all the instrument types they can be used for. I put instruments that play intervals or chords into “experimental”. i put 8-bit and waveform component tool instruments into “Synth Misc”.
Super Hint: Save Drum Racks which are melodic as opposed to percussive into one of the instrument categories to have that drum rack appear in “Sounds” instead of in “Drums”! I haven’t figured out if it’s possible to get percussive Simpler or Sampler presets to appear in “Drums”. But at least you can can put them into the ‘Percussive’ category.
Audio Effect Racks: I put distortion, saturation & degradation fx into “distortion”, while amp, cab, mic & tape fx into “amp simulation”. Anything specifically for Drum processing i put in “Drums” — other instrument-specific fx / chains (including for voice) in “Instrument”. I put modulation fx (other than chorus, pitch & some other fx) and delay into “Modulation & Rhythmic” (using name-changes is essential for separating delays from other effects here) . Having both a “Hall” and a “Room” category, i recommend putting very short ambient short reverbs into “Room” and longer, lusher reverbs into “Hall”. Or, you could use one for insert reverbs and one for send reverbs (make one default preset of each for each reverb plugin — the insert presets starting from 0-20% wet and the send presets set to 100% wet 0% dry).
I use the “Space” category for chorus, stereo width, tremolo, and the like. I use “special” for analyzers, frequency splitters, routers, and other miscellaneous tools.
Drum Hits: Organizing drum hits is extremely useful because you can set it up so that both samples and instrument patches triggering one-shot samples can appear together, making assembling your own custom drum kits from scratch a breeze.
Drum hit samples that aren’t specifically put in one of these categories won’t appear there — they will be mixed in with the kits in a big mess. If you categorize all your hits, navigating your kits via the browser list rather than search might actually be feasible (although there is no known way yet to re-categorize any core pack hits that are uncategorized to begin with, so they remain in the messy list. Shucks.)
Drum Kits: (see “Super Hint” above). I highly recommend using “Name-Changing” to organize your drum kits. If nothing else just make sure they say “Kit” in the name somewhere so you can that search by term and see all your kits easily (not mixed in with uncategorized individual drum hits). For further refinement, make subcategories “Kit Acoustic ___” “Kit Glitchy ___” “Kit Tasty ___” or whatever.
“Snare Articulation” is for snare presses, brushes, rolls etc.
I noticed at some point that “Timbales” is also included in the drum hits categories. You could use this category folder name for timpani drums too, since timbales are descended from them, if you want, perhaps use it as a category for all pitched drums.
MIDI Effect & MIDI Effect Racks:
I’ve only found a few categories for MIDI effects. The experimental and arpeggio categories i discovered more recently, so wonder if there are more i don’t know about.
“Performance & DJ” i put devices which i have used, or plan to possibly try using, live (minus arpeggios and sequencers).
In “Experimental” i’m placing more bizarre glitch effects and wacky fun stuff. Not stuff you would use live because stability would be questionable, but tools for wild spontaneity during composition and sound design (make crazy stuff, freeze and flatten).
“Arpeggio” has specifically sequencers and arpeggiators. The MaxForLive community has created and shared tons of awesome and unique sequencers, so after i test one i like, i save it in a default midi effect rack and categorize it here.
“Others” has a ton of stuff in it. Wish could sub-categorize more.
VST effects can be custom-organized into their own folders (in case you didn’t know). Unfortunately, Audio Units cannot. While i recommend making a Holder Rack for each of your VSTs so they show up as presets in the browser anyways, you may instead (or additionally) prefer to organize your VSTs according to type inside the plugin folder. In this case, just make folders inside your VST plugin location named whatever you want, and they will show up in the browser’s “Plugins” link as such. You can usually move vsts that have required files in a folder with them; just make sure you move such files as well to the same folder. I have had one or two instances of issues when trying to put certain plugins in the same folders as others, so be careful and rescan/test after every change.
<–…Example VST FX Custom Whatever Categories
Since the point of such a-retentive preset organization is to be able to quickly access what you need, when you need it, the concept of utility (“usefulness”) is paramount. If you are bulk dumping 5,000 presets you’ve never even tested into a category, you may end up wasting a lot of time later combing through them. Risky presets will only be an annoyance when hotswapping… unstable ones might cause a crash. Try to test every tool that’s in your library at least once (a short “full clip” loop containing drums, bass, and melody layers is a great source for testing just about anything), and if something is whack, level-wise or tone-wise, either fix it real quick or delete it. Seriously, deleting a preset which is just going to annoy you later is way preferable than stumbling across it and it getting in your way. My rule is to only import instrument presets, effect racks, midi racks, max for live devices, or vst plugins and organize them into my browser if i have the time to test them as i do so. For instrument presets i make sure the typical note at max velocity doesn’t peak muych above -6dB, so all my instruments are close to the same level when browsing presets. Switching between two flute synths and one is 18dB louder than the other makes for a faulty comparison due to how our ears hear at different loudness levels, and would require an adjustment on-the-spot. By instead doing these adjustments one time for each patch first, you save tons of time later because you never have to do them again, and auditioning presets becomes smooth as butter and more fun than frightening. For audio effects, i try to set them at a neutral default setting (depending on the effect there may be no 100% dry setting) and get the gain as close to +/- zero as possible. Same as with a synth preset; testing out 3 different “upper mid saturation” presets is not going to be useful if one of them is 2dB louder than another — it might sound “better” just because of that, and would result in bad decision making.
GOING EXTRA DEEP: CUSTOM ORGANIZATION!
Check out PART 2 if you’re ready to roll up your sleeves and get dirty