Here’s a {free} ableton live pack of effects that are made for simple yet extremely useful purposes, including fading, stereo panning, m/s encoding and decoding,.
It is highly recommended to grab these and implement them into your Ableton Live library.
INCLUDES:
Audio FX
“-inf to +0 Fader” — just like it says, this is a simple fader from negative infinity to zero decibels. When you want a quick and easy volume knob that goes all the way to silence and maxes out with no boost (unlike the “utility” device), use this.
“LR to MS Controller” — this will switch a Left-Right Stereo file to transmit its left channel as the sides and its right channel as the center, or you can swap those results so the right is the sides and the left becomes the center.
You can then tilt the center and sides channels, mute them, and alter their levels.
“MS to LR Controller” — this will switch a Mid-Side Stereo file to transmit its sides channel as the left and its center channel as the right, or you can swap those results so the center is the left and the sides becomes the right.
You can then tilt the left and right channels, mute them, and alter their levels.
[an example of using these controllers would be to make an MS recording into LR to be able to apply a stereo effect to it, then to return it back to MS again]
“Instant Muter” — Mutes the audio, plain and simple, the moment the knob is moved above its minimum value. Use this to be able to easily interrupt the audio flow wherever you want within a chain.
“Stereo Panner” — Allows for “stereo panning”. Using clever routing, this allows non-exclusive panning of audio wherein the content from the opposite side is moved over rather than being faded out (while maintaining overall level). This allows for more natural-sounding panning of stereo sources without losing material.
[For example, let’s say you have a stereo track with a guitar panned hard to the left side and a piano panned hard to the right. Normally if you use a pan knob to move right, the guitar sound would be lost. With this, panning right will gradually move the guitar over to the right along with the piano, rather than removing it.]
“Phase Adjust” — Select among 4 phase-flip options with one knob, and implement micro-delay to align waveforms more carefully, either between the source and the mix or between the left and right halves of the source.
“Utilify” — “Swiss army knife” which includes most of the above devices in one rack. Use this as a more robust replacement for Ableton’s built-in Utility effect.
